Liquid filling machine must be installed, operated and maintained by full-time personnel. Before installation, operation, maintenance and inspection, please read the operation manual carefully for correct use. The equipment can only be installed, operated, inspected and maintained after mastering the relevant equipment conditions, safety information and precautions.

Safety precautions for liquid filling machine operation:

(1) Before starting the liquid filling machine, check the ground wire of the equipment, check whether there is air leakage in the moving pipeline and whether the air pipe is broken

(2) Do a good job in cleaning the filling machine equipment, keep the appearance of the filling machine clean, often remove the accumulated material on the scale, pay attention to the cleaning of the electric control cabinet

(3) Replace the lubricating oil for the motor every year, check the tightness of the chain, and adjust the tension in time

(4) In production, we should often inspect and observe the filling machine parts to see whether the rolling and lifting are normal, whether there is abnormality, and whether the screw is loose

(5) The sensor of liquid filling machine is a kind of equipment with high precision, high sealing degree and high sensitivity. It is forbidden to impact and overload. It is not allowed to touch during the working process. It is forbidden to disassemble the sensor without maintenance requirements

(6) If the liquid filling machine is not used for a long time, the material in the pipe must be emptied, and the pipe can be cleaned by clean water circulation.